Preinstallation requirements | Standard 1.04 |
The following diagram shows how to remove the side panel. See the instructions for removal below.
1 |
2 |
3 |
G101761 |
1Place the server on its side on your working surface.
2Turn the two thumbscrews on the back of the server
Note: The thumbscrews are not removable.
Note: If a removable screw is present, remove it. This screw secures the cover to the server during shipping.
3Place your fingertips in the depression on the side cover, and then as you apply pressure, pull the cover approximately 25 mm (1 in.) away from the front of the server until it stops.
40 | CallPilot |
