October 2006 | Installing the server and connecting the peripheral devices |
3At the switch, connect the ELAN network cable to an MAU (Ethernet) transceiver. Then complete the connection from the transceiver to the switch.
DANGER
Risk of fire hazard
The NTRH9069 MAU is not suitable for installation in ducts, plenums, or other spaces used for environmental air. Do not install it above a false ceiling or below a raised floor, unless it can be confirmed that these spaces are not used to convey environmental air.
What’s next?
IF the server will | THEN |
|
|
be connected to a CLAN | continue with page 60. |
|
|
not be connected to a CLAN | continue with installing the software |
| feature dongle. See page 61. |
|
|
703t Server Hardware Installation | 59 |
