Nortel Networks manual Unpacking the 703t server, To unpack the equipment

October 2006 Preinstallation requirements

Unpacking the 703t server

Introduction

Follow this procedure to unpack the server and peripherals.

WARNING

Risk of personal injury

The 703t CallPilot server weighs approximately 22 kg (46 lb) as shipped from manufacturing. If necessary, and to prevent personal injury, ask someone to help you unpack and position the server.

To unpack the equipment

ATTENTION	As you unpack each item, check it off against the
	packing list, as well as against the following checklists
	provided in the Installation and Configuration Task List
	(555-7101-210):
	„	“CallPilot software media and documentation
		checklist”
	„	“CallPilot server hardware checklist”

1Carefully open the cardboard carton containing the server.

2Remove the server from the carton and set it on the floor.

3Carefully open the cartons containing the monitor, keyboard, mouse, modem, and ELAN hub (if supplied), and set the peripherals aside.

4Put all manuals, CD-ROMs, operating system disks, and any disks for peripherals in a safe place.

703t Server Hardware Installation 37