703t server description

Standard 1.04

Supported peripheral devices

This section identifies external devices that are supported by the 703t server. The following table describes the supported peripheral devices:

Device

Description

 

 

Modem

A 56 Kbps external modem (NTRH9078 in North America

 

only) provides remote access to the 703t server. The modem

 

connects to the RS-232 COM1 connector on the rear of the

 

server.

 

Because the modem is an external device, it requires its own

 

AC power source referenced to the same ground as the 703t

 

server and the switch to which it is connected.

 

 

Ethernet hub

A 10Base-T Ethernet hub provides the ELAN connection

 

between the 703t server and the Meridian 1 switch or

 

Succession 1000 system. The customer can supply a hub or

 

switch from third-party vendors or from Nortel.

 

Because the hub is an external device, it requires an AC

 

power source referenced to the same ground as the 703t

 

server and the switch to which it is connected.

 

ATTENTION

 

To comply with EMC requirements, a Class A hub must be

 

located 10 m (33 ft.) away from the 703t server.

Monitor,keyboard, „ 15-inch monitor: NTRH9011 or N0038380 LCD monitor

and mouseBecause the monitor is an external device, it requires its own AC power source referenced to the same ground as the 703t server and the switch to which it is connected.

„Keyboard: NTRH9013

„Mouse: NTRH9014

30

CallPilot

Page 30
Image 30
Nortel Networks 703t manual Supported peripheral devices