Installing the server and connecting the peripheral devices | Standard 1.04 |
Installing the server
Before you install the 703t server, ensure that the chosen location meets the requirements identified in the “Site inspection checklist” provided in the Installation and Configuration Task List
To install the server
1Place the 703t server in its chosen location.
Note: The server must be placed within 20 m (60 feet) of the Meridian 1 switch or Succession 1000 system.
Note: The DS30X cable that connects the MPB96 boards to the MGate cards is 20 m (60 feet) long. This allows the server to be placed in a different room from the Meridian 1 switch or Succession 1000 system.
2Connect peripheral devices as described in the remainder of this chapter.
48 | CallPilot |