Nortel Networks i2021 Series manual Auto-Spid, AUTO-SPID Procedures

i2021 ISDN Teleset

AUTO-SPID

Auto-SPID is a National 2 and National 3 ISDN feature. Not all switch types and not all service providers support the Auto-SPID feature. If Auto- SPID is supported, follow the procedure shown below.

AUTO-SPID PROCEDURES

When the countdown timer stops, or is aborted, the Teleset automatically sends the Auto-SPID code to the switch. Upon receipt of the Auto-SPID code, the switch will download all of the SPID’s that are supported on that line.

NOTE: If the SPID is not accepted for any reason - including the

SPID being used at another location - the phone displays: “Invalid SPID,” and allows correction of the SPID.

If the switch supports Auto-SPID, the i2021 will display all of the SPIDs available on the line in the following format:

If the SPID displayed is not the correct SPID for your application, press the Next key.

Pressing the Detail softkey will display the SPID, the Primary Directory Number, and the Bearer Services assigned to the SPID. The detail information will scroll across the top line of the display.

When the correct SPID is displayed, press the Select softkey to choose it.

NOTE: The last 2 digits of the SPID are known as the TID (Terminal IDentifier). The i2021 automatically inserts the TID at the end of the SPID. The TID is displayed as part of the SPID.

15