Nortel Networks i2021 Series manual 2ND Ring, Primca Primary Call Appearance

i2021 ISDN Teleset

Press MENU to return to the startup screen. The SaVol key sets the default level of the ringing pattern. The Ring Pattern level returns to this volume setting if the Teleset power is reset. The Ringing Pattern volume may be adjusted at any time by pressing the volume keys while the Teleset is ringing. The Teleset will remember the volume setting until power is reset.

2ND RING

The 2nd Ring option controls how the Teleset audibly reacts to an incoming call on another Call Appearance when you are already off-hook on an active call. The choices are Continuous Ring, Partial Ring, and No Ring.

With Continuous Ring, the Teleset will sound the 2nd Ring “beep” with every ring cycle.

With Partial Ring, the Teleset will sound the 2nd Ring “beep” with a shorter duration every other ring cycle.

With No Ring, there will be no audible ring during the ringing cycle.

NOTE In all cases the Call Appearance LED will flash, and the display will continue to show the Calling Line ID if available.

To set the 2nd Ring option press MENU, MORE, Ring, 2ndRing

PRIMCA (PRIMARY CALL APPEARANCE)

Primary Call Appearances are Call Appearance locations you consider to be your own. Do not confuse PrimCA locations with Primary Directory

29