Nortel Networks IP Phone 1230 manual Using Automatic Preselection Meet-Me

Operating your IP Phone 1230

Using Automatic Preselection (Meet-Me page)

Perform the following procedure to use Automatic Preselection.

(Goodbye) or

1.Lift the handset.

2.Dial the Radio Paging Access FFC.

You hear the paging tone (two beeps followed by a dial tone).

3.Dial the number of the party you want to page.

After dialing, you hear the ringback tone.

The paged party can use any telephone to enter a Radio Paging Answer FFC and their own DN number.

4.If your call remains unanswered for a preset time period, during which you hear a 15-second high-pitched tone sounds followed by silence, press the Goodbye key or replace the handset.

Using Automatic Post-selection

The called party is either busy on the telephone or away from their desk. To page the called party, you do not need to redial the number of the called party.

RadPag	1. Press the RadPag soft key.
	You hear a special dial tone.

134