Nortel Networks IP Phone 1230 manual Using the Callers List

Operating your IP Phone 1230

•“Using the Personal Directory” on page 93

•“Using Predial” on page 94

•“Using AutoDial” on page 95

•“Using Ring Again” on page 97

•“Using Last Number Redial” on page 98

•“Using Speed Call” on page 99

•“Using System Speed Call” on page 100

•“Using HotLine” on page 100

•“Using Intercom Calling” on page 101

Using the Callers List

The Callers List logs all incoming calls. The Callers List can store up to 100 entries. When the list is full, the oldest entry is overwritten. Use the Callers List to review missed calls and make a call, if desired. The Callers List contains the following components:

•the caller’s last and first name (if available)

•the DN of the caller

•the time and date of the call

•the number of times the caller called

Callers List entries are sorted by call arrival time.

The format of names in the Callers List depends on the configuration of Preferred Name Match. The Calling Party Name Display (CPND) appears according to the configuration settings on your IP Phone if Preferred Name Match is active on your IP Phone. If Preferred Name Match is off, the CPND appears as determined by the system configuration.

To access the Callers List, press the Directory key, and select Callers List. If password control is enabled, you must enter your SCPW at the prompt.

84