C Commands Summary
110 MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2
MESSAGES
The MESSAGES command is used to disable the port prompt and error message reporting from a specified port.
This feature can be useful if the port is connected to a modem or other device that responds with data the GPSCard
does not recognize. See Chapter 3 for further information on using this command with Special Pass-Through L ogs.
Syntax:
Example:
messages com1,off
MESSAGES port option
Syntax Range Value Description Default
MESSAGES - Command MESSAGES
port COM1, COM2 or all Specifies the port being controlled -
option ON or OFF Enable or disable port prompt and error message reporting ON