C Commands Summary
134 MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2
UNLOG
This command permits you to remove a specific log request from the system.
The [port] parameter is optional. If [port] is not specified, it is defaulted to the port that the command was received
on. This feature eliminates the need for you to know which port you are communicating on if you want logs to
come back on the same port you are sending commands on.
Syntax:
Example: unlog com1,posa
unlog posa
UNLOGALL
If [port] is specified (COM1 or COM2) this command disables all logs on the specified port only. All other ports
are unaffected. If [port] is not specified this command disables all logs on all ports.
Syntax: UNLOGALL [port]
NOTE: This command does not disable logs that have the HOLD attribute (see description for LOG command).
To disable logs with the HOLD attribute, use the UNLOG command.
UNLOG [port]datatype
Syntax Range Value Description Default
UNLOG -Command unlogall
[port] COM1, COM2 COMn port from which log originated
datatype any valid log The name of the log to be disabled