C Commands Summary
88 MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2
CONFIG
This command switches the channel configuration of the GPSCard between pre-defined configurations. When
invoked, this command loads a new satellite channel-configuration and forces the GPSCard to reset. The types of
configurations possible are listed by entering this command:
HELP CONFIG
In some applications, only the standard (default) configuration will be listed in response. The standard
configuration of a MiLLennium GPSCard consists of 12 L1/L2 channel pairs.
Syntax:
CONFIG cfgtype
Command Option Description Default
CONFIG Command
cfgtype (none) Displays present channel configuration MiLLen-STD: STANDARD
MiLLen-STDW: WAASCORR
configuration
name Loads new configuration, resets GPSCard:
STANDARD 12 GPS
WAASCORR a10 GPS + 1 WAAS
a. This cfgtype is only available on WAAS/EGNOS enabled models.