C Commands Summary
MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2 121
SAVEALMA
This command saves the latest almanac in non-volatile memory.
The option ONNEW is the default; if a different setting is used, a SAVECONFIG command must be issued or else
ONNEW will resume after a reset.
Bit 21 in the receiver self-test status word (see Table D-5, Page 198) indicates whether the latest almanac received
by the GPS receiver is newer than the almanac saved in non-volatile memory (NVM).
Syntax:
The disable option must be followed by the SAVECONFIG command to have an effect.
SAVEALMA option
Command Range Values Description Default
SAVEALMA -Command
option onnew Each almanac is saved in NVM upon reception if it is newer than the one already
stored. This will occur continuously. onnew
stop Stops auto saving.
disable Stops auto saving and prevents the use of the almanac, saved in NVM, on startup.