C Commands Summary
130 MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2
SETTIMESYNC
This command enables or disables time synchronization, which permits two GPSCards in a master/slave
relationship to be synchronized to a common external clock for range comparisons. By default, this function is
disabled.
With SETTIMESYNC enabled, a slave unit is able to interpret injected ($)TM1A/B data messages; for more
information, please refer to the comments relating to the ($)TM1A/B special data messages, and the 1PPS signal.
Syntax:
Example: settimesync enable
NOTE: This command is intended for advanced users of GPS only.
SETTIMESYNC flag
Command Range of Values Description Default
SETTIMESYNC -
flag enable or disable Enable or disable time synchronization disable