D Logs Summary
216 MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2
SBTA/B Satellite Broadcast Data: Raw Symbols

This message contains the satellite broadcast data in raw symbols before FEC decoding or any other processing.

An individual message is sent for each PRN being tracked. For a given satellite, the message number increments

by one each time a new message is generated. This data matches the RBTA/B data if the message numbers are

equal. The data must be logged with the onnew trigger activated to prevent loss of data.

SBTA

Structure:

SBTB

Format: Message ID = 53 Message byte count = 168

$SBTA week seconds prn cstatus message # # of symbols
raw symbols *xx [CR][LF]
Field # Field type Data Description Example
1$SBTA Log header $SBTA
2week GPS week number 883
3seconds GPS seconds into the week 413908.000
4prn PRN of satellite from which data originated 120
5 cstatus Channel Tracking Status 80812F14
6message # Message s equence number 119300
7# of symbols Number of symbols tr ansmitted in the message. At present,
always equals 256 symbols. 256
8raw symbols 256 symbols compressed into 128 bytes, i.e. 4 bits/symbol.
Hence, 256 hex characters are output. If FEC decoding is
enabled, soft symbols are output with values ranging from E
to 3 where 3s represent binary 1 and Es represent binary 0
output.
EE33EEEE33333E33EE33EEEE33
333E33EE33EEEE33333E33EE33E
EEE33333EEEE3333EEE33E33E3
EE33EEE3EEEE33EE3E3EEEEEE
EEEEEEEE3333EEE33EEEEE33E
E3EEE3E3EE3EE33EEE33E333EE
3333E3E3333E33E3333EEEEE333
EE3E3333EE3EE3EE33EE3EE3EE
3E33E33E3EEE33333E3333E33E3
E333E3E33333E3EEE3E3E
9*xx Checksum *4C
10 [CR][LF] Sentence terminator [CR][LF]
Field # Data Bytes Format Units Offset
1Sync 3char 0
(header) Checksum 1char 3
Message ID 4integer 4
Message byte count 4integer bytes 8
2Week number 4integer weeks 12
3Seconds of week 8double seconds 16
4PRN number 4integer 1-999 24
5Channel Status 4integer n/a 28
6Message # 4integer n/a 32
7# of Symbols 4integer n/a 36
8Raw Symbols 128 char n/a 40