C Commands Summary
MiLLennium GPSCard SW Version 4.503/4.52 Command Descriptions Manual Rev 2 125
SETDGPSID
This command is used to enter a station ID. Once set, the receiver will only accept differential corrections from a
station whose ID matches the set station ID. It is typically used when a station has data links containing RTCM or
RTCA messages from several stations. By entering a specific station ID, the operator can select which station to
listen to. Having set a station ID, incoming, RTCM, RTCMA, RTCA, RTCAA, and RTCAB messages will be
received from only that station. When a valid station ID is entered, an improved data synchronization algorithm
will be used. It is recommended to always set the station ID. This command can also be used to set the station ID
for a GPSCard reference station. See FIX POSITION 4th parameter (station ID).
Syntax:
Example 1: SETDGPSID 1023
Example 2: SETDGPSID abcd
SETDGPSID station ID #
SETDGPSID all
Syntax Range Value Description Default
SETDGPSID Command
station ID # 0 - 1023
or
xxxx
or
0 - 31
or
all
Reference station ID number for RTCM
Reference station name for RTCA where xxxx are four
alphanumeric characters, entered between double quotes
Reference station ID number for CMR
Accepts differential corrections from any station
all