Page: 92
Service Guide ML520/521
Chapter 3 Maintenance & Disassembly
3.2.23 Idle Gear and Change Lever
1.Perform these procedures: 3.2.01
, 3.2.06
, 3.2.07
, 3.2.16
, 3.2.17
, 3.2.19
, 3.2.20
, and 3.2.22
.
2.Remove the idle gear (1). The idle gear is a large narrow gear.
3.Release the claw (2) of the change lever (3). The claw is accessed from inside the unit.
4.Remove the change lever.
NOTE:
Lubrication When lubricating, refer to Section 3.5 of this Service Handbook.
