Paper Park

Automatic Paper Loading

Forms Tear Off

1.6.15 Paper Loading

Auto Loading (Top Feed)

Press FORM FEED / Load switch to feed paper to default position

1.6.16 Paper Out Detection

Distance from end of paper

Rear Feed: 0.5 inches (12.7 mm)

Bottom Feed: 0.5 inches (12.7 mm)

Top Feed: 0.5 inches (12.7 mm)

1.6.17 Paper Tear Capabilities

Forms Tear-0ff (sharp edge on access cover)

Metal Tear Bar (with optional bottom feed tractor unit)

1.6.18Print Method

Printhead Type General Information

Impact: Dot Matrix 9 pin printhead

.0134 inch (0.34 millimeter) diameter pins

Overheat Protection

When printhead temperature exceeds 110 degrees Celsius, the printer stops bi-directional printing. Uni-directional printing begins.

If the temperature exceeds 118 degrees Celsius, printing stops.

Printing will resume when the printhead temperature drops below 118 degrees Celsius.

NOTE:

Refer to Section Two for more information on printhead operation.

Printhead Gap Information

Three items factor into printhead gap information:

Page 18
Image 18
Oki ML520 Paper Loading, Paper Out Detection, Paper Tear Capabilities, Print Method Printhead Type General Information