8 | Printhead | Self adjust was not | Check the printhead |
| Connection Alarm | successful. Head gap is | connection. Then |
| (2) | too small or too narrow. | replace the main control |
|
|
| board the carriage cable |
|
|
| and the printhead. |
|
|
|
|
9 | Line Feed / Space | High driver temperature. | Replace the following: |
| Motor Driver Alarm | The TSD signal has not | main control board line |
|
| changed. | feed motor and space |
|
|
| motor. |
|
|
|
|
10 | MPU Internal RAM | Read/write error | Replace the main control |
| Alarm |
| board. |
|
|
|
|
11 | Program ROM | Check sum error | Replace the main control |
| Alarm |
| board and/or ROM. |
|
|
|
|
12 | RAM on Main | Read/write error | Replace the main control |
| Control Board |
| board. |
|
|
|
|
13 | CG ROM Alarm | Check sum error | Replace the main control |
|
|
| board. |
|
|
|
|
CAUTION:
Always check that all connectors on the printer are making good contact.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
