Page: 72

Service Guide ML520/521

Chapter 3 Maintenance & Disassembly

3.2.03 Ribbon Protector

CAUTION

You MUST use a straight slot screwdriver to release the ribbon protector. If you attempt to lift the protector without releasing the tabs, the protector will break.

1.Perform these procedures: 3.2.01, and 3.2.02.

2.Open the pull-up roller cover (1).

3.Use a straight-slot screwdriver to release the extensions (2) from the carriage frame set (3).

4.Lift the ribbon protector (4) straight up and remove it.

P/N 53562801 Protector: Ribbon RSPL Both B.2.07

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Page 98
Image 98
Oki ML520 Maintenance & Disassembly Ribbon Protector, Perform these procedures 3.2.01, Protector Ribbon Rspl Both B.2.07