
Using the Variable Control Voice Actuator (VCVA)
When the microphone senses that sounds have reached a preset volume, the
ERASE | SP DICT | MENU |
|
| |
|
| /VOL |
1 Press the MENU/VOL switch.
1,3 2 Move the MENU/VOL switch down to choose “VCVA”.
|
|
| 2 | 3 | Press the MENU/VOL switch to |
|
|
|
| ||
5 |
| INDEX/ |
| choose “ON”. | |
| FOLDER | 4 |
| ||
REC | STOP |
| Press the STOP button. | ||
|
|
|
| 4 This completes the VCVA setup procedure. |
5 Press the REC button.
The recorder will start recording in VCVA mode.
................................................................................................
Notes
•When the VCVA senses sound louder than its start/stop actuation level setting, recording starts automatically. When it senses silence for 3 seconds or longer, recording pauses automatically and the recorder enters standby mode.
•When recording is in progress, the record indicator lamp will glow. When the recorder is in standby mode, “VCVA” will flash on the display and the record indicator lamp will flash.
•Pressing the STOP button will stop recording whether the recorder is recording or in standby mode.
Using the
Variable Control
Voice
Actuator (VCVA)
27