Omega Engineering OS523, OS530HR, OS531, OS53X-CF, OS524 manual Key to decrement the printing interval

PRN °F

Using the Handheld Infrared Thermometer 2

NOTE

Bottom hole is

the RS-232 jack

RS-232	Serial Printer
Digital
Cable

6-pin	25-pin 'D'
	Connector
Phone Jack
	To the
To the
Thermometer	Printer

Figure 2-14. Serial Printer Hookup

3.Pull the trigger and press the key to lock the

trigger. The icon will appear on the display.

4.Press and hold the until the Print Data display Mode (PRN) appears.

5.	Press the	key to increment the printing interval. Press
	the	key to decrement the printing interval. The
	printing interval (from 1 to 1999 seconds) is the time
	between data points. The default value is 2 seconds.

6.Press the key to start sending data. The

icon appears on the display.

NOTE

To stop sending data, press the key again, and

the icon disappears.

2-19