Omega Speaker Systems PCI-DAS1002 ADC 8254 Control Register, DIO Port a Data, DIO Port B Data

8254A COUNTER 2 DATA - ADC PACER DIVIDER UPPER BADR3 + 2

READ/WRITE

7	6	5	4	2	3	1	0
D7	D6	D5	D4	D3	D2	D1	D0

Counter 1 provides the lower 16 bits of the 32-bit pacer clock divider. Its output is fed to the clock input of Counter 2 which provides the upper 16-bits of the pacer clock divider. The clock input to Counter 1 is a precision 10MHz oscillator source.

Counter 2 output is called the 'Internal Pacer' and can be selected by software to the be the ADC Pacer source. Counters 1 & 2 should be configured to operate in 8254 Mode 2.

ADC 8254 CONTROL REGISTER

BADR3 + 3

WRITE ONLY

7	6	5	4	2	3	1	0
D7	D6	D5	D4	D3	D2	D1	D0

The control register is used to set the operating Modes of 8254 Counters 0,1 & 2. A counter is configured by writing the correct Mode information to the Control Register followed by count written to the specific Counter Register.

The Counters on the 8254 are 16-bit devices. Since the interface to the 8254 is only 8-bits wide, Count data is written to the Counter Register as two successive bytes. First the low byte is written, then the high byte. The Control Register is 8-bits wide. Further information can be obtained on the 8254 data sheet, available from Intel or Harris.

7.5.2 DIGITAL I/O DATA AND CONTROL REGISTERS

he 24 DIO lines on the PCI-DAS1000 are grouped as three byte-wide I/O ports. Port assignment and functionality is identi- cal to that of the industry standard 8255 Peripheral Interface. Please see the Intel or Harris data sheets for more

information.

DIO PORT A DATA

BADR3 + 4

PORT A may be configured as an 8-bit I/O channel.

READ/WRITE

7	6	5	4	2	3	1	0
D7	D6	D5	D4	D3	D2	D1	D0

DIO PORT B DATA

BADR3 + 5

PORT B may be configured as an 8-bit I/O channel. Its functionality is identical to that of

PORT A.

READ/WRITE

7	6	5	4	2	3	1	0
D7	D6	D5	D4	D3	D2	D1	D0

27