Onkyo TX-NR900E Using remote controller, Controlling an Onkyo MD recorder, REC Record

Using remote controller

ON STANDBY

SAT/MD MODE

VOL

MUTING

MD

operation buttons

Numeric keys

ENTER

Controlling an Onkyo MD recorder

The connector of the Onkyo MD recorder must be connected to the TX-NR900/900E (see page 28).

1.Press the SAT/MD MODE button.

The SAT/MD MODE button lights.

2.Press the desired operation button.

The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo MD recorder.

Operation buttons:

ON: Turns on and off MD player (same as STANDBY button on the remote controller)

: Track down

: Track up

: Play

: Stop

: Skip backward

: Skip forward

REC ●: Record

: Pause

: Eject

1 to 9, 0, --/---: Numeric keys

ENTER: Enters the settings

You may also use the following buttons:

VOL : Adjusts volume at TX-NR900/900E

MUTING: Activates muting function at TX-NR900/900E

Note:

The SAT/MD button is used for operating satellite tuners and Onkyo MD recorders. Be aware that if you enter the preset code for a satellite tuner as shown on page 70, then this button cannot be used to operate Onkyo MD recorders.

If this is the case, to operate an Onkyo MD recorder, you must first erase the satellite tuner code by following the directions given in “Erasing all the commands programmed under a MODE button” on page 75.

69