Onkyo TX-NR900 Using remote controller, Overview, Controlling an Onkyo cassette tape deck

Using remote controller

Overview

The RC-511M remote controller is a useful tool that can not only operate the TX-NR900/900E, but also all the other components of your home theater as well. To operate any component, first press the Mode button on the remote controller that corresponds to the component that you wish to control. Then simply press the desired operation button and the component will operate accordingly.

To operate a satellite tuner, cable, VCR, or television with the remote controller, first program the signal to the button.

There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the pre-programming code (see page 70). The other method is sending the commands from the other brand’s remote control directly into this remote controller (see page 74).

RCVR MODE

VOL

MUTING

TAPE operation buttons

Controlling an Onkyo cassette tape deck

The connector of the Onkyo cassette tape deck must be connected to the TX-NR900/900E (see page 28).

1.Press the RCVR MODE button.

The RCVR MODE button lights.

2.Press the desired operation button.

The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo cassette tape deck.

Operation buttons:

: Play

: Stop

: Rewind

: Fast forward

: Skips to beginning of next track during playback

: Skips to beginning of current track during playback REC ●: Record/Pause

: Reverse playback

You may also use the following buttons:

VOL : Adjusts volume at TX-NR900/900E

MUTING: Activates muting function at TX-NR900/900E

Note:

Even for devices with the and buttons, signal discrepancies may cause them not to work properly.

66