Onkyo TX-NR900E instruction manual Enjoying music or videos with theTX-NR900/900E, Basic operation

Enjoying music or videos with theTX-NR900/900E

				Input source buttons				MASTER VOLUME	RCVR
								MASTER VOLUME	VOL /
STANDBY
STANDBY/ON
POWER
ON OFF
		ZONE 2 (GRN )
	AUDIO	REC ( RED ) DVD VIDEO 1	VIDEO 2	VIDEO 3	VIDEO 4 VIDEO 5	TAPE TUNER	PHONO C D NET AUDIO
PURE AUDIO UPSAMPLING	SELECTOR						DISPLAY
		VCR 1	VCR 2
PHONES	REC OUT	ZONE 2 OFF STEREO SURROUND	THX	DSP	RT/PTY/TP MEMORY FM MODE SETUP	ENTER	RETURN	VIDEO 5 INPUT
ZONE 2 LEVEL					CLEAR	TUNING	PRESET	VIDEO L AUDIO R	INPUT
							DIGITAL S VIDEO

SELECTOR

TAPE buttons

Though the TX-NR900/900E is often used to listen to the radio, it does not show you its true ability until it is used to play music or watch videos, DVDs, and the like. The TX-NR900/900E has the latest and most state-of-the-art features to play back today’s technologies with the utmost in fidelity and power. From a two- speaker system to a seven-speaker system, you are assured a sound space that you can always enjoy.

To ensure the proper sound space, you must first perform the speaker setup settings. These settings allow you to set the type of speakers you are using, the distance that they are located from the listening position, and the individual speaker volumes. For more details, see Speaker Setup Sub-menu of the Setup Menu on page 48.

Basic operation

If you want to perform these operations using the remote controller, first press the RCVR button.

1.Press the input source button (or INPUT SELECTOR button on the remote controller) that corresponds to the source to which you want to listen.

TX-NR900/900E

DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 TAPE TUNER PHONO C D NET AUDIO

Remote controller

Adjusting the main volume adjusts the volume level of all the speakers connected to the TX-NR900/900E together. If headphones are connected, this also adjusts the volume heard from the headphone speakers. To adjust the volume, either press

the VOL buttons on the remote controller or turn the MASTER VOLUME dial. To increase the volume, turn the dial clockwise; to decrease the volume, turn the dial counterclockwise. The volume can be set to 0 to 100 (or –∞, –81 to +18 dB).

To change the display of the input source from TAPE to MD

If you connected an MD recorder to the TAPE jack on the TX- NR900/900E, you can have “MD” appear when the TAPE source button is pressed.

Changing the display:

Press and hold down the TAPE source button until the display changes from TAPE to MD (approx. 3 seconds).

TAPE

To return the display to its original setting, perform the same procedure.

2.Turn on the corresponding component and play the media.

3.Adjust the volume.

TX-NR900/900E	Remote controller
MASTER VOLUME

31