Enjoying music or videos in the remote zone
ZONE 2 indicator
STANDBY/ON |
|
|
|
|
|
|
|
|
|
|
|
|
STANDBY |
|
|
|
|
|
|
|
|
|
|
|
|
POWER |
|
|
|
|
|
|
|
|
|
|
|
|
ON OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ZONE 2 (GRN ) |
|
|
|
|
|
|
|
|
|
|
| AUDIO | REC ( RED ) DVD | VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 | VIDEO 5 | TAPE | TUNER | PHONO | C D | NET AUDIO |
PURE AUDIO UPSAMPLING | SELECTOR |
|
|
|
|
|
|
|
|
|
|
|
|
|
| VCR 1 | VCR 2 |
|
|
|
|
|
|
|
|
MASTER VOLUME
DISPLAY
PHONES
ZONE 2 LEVEL
VIDEO 5 INPUT
REC OUT ZONE 2 | OFF | STEREO SURROUND THX | DSP | RT/PTY/TP MEMORY FM MODE SETUP | ENTER | RETURN |
|
|
|
| CLEAR | TUNING | PRESET |
DIGITAL | S VIDEO | VIDEO | L AUDIO R |
OFF Input source buttons
ZONE 2 ZONE 2 LEVEL 
/ 
Using the buttons on the TX-NR900/900E
1.Press the ZONE 2 button on the
2.Select an input source.
After pressing the ZONE 2 button, you must press an input source button within 8 seconds. The indicator above the input source button lights green. In this condition, even if you change the input source for the main zone, the input source for the remote zone (Zone 2) will not change.
Ex.: When the CD button is pressed.
To select the same source for the remote zone that is selected for the main zone, press the ZONE 2 button again until “Zone2Sel:SOURCE” appears in the display. In this condition, if you change the input source for the main zone, the input source for the remote zone (Zone 2) will change as well.
When “Zone2Sel:Off” is displayed, the output to the remote zone is turned off.
Notes:
•If a sleep time is set with the SLEEP button, the output to the remote zone will also turn off when the sleep time elapses.
•The ZONE 2 terminal is an analog output. Digital signals are not output. If no sound is heard from the selected input source, check if the component is connected to the analog inputs.
•If the REC OUT button is pressed in the main room while someone is using the system in the remote zone, the Zone 2 function will be deactivated and the source will turn off in the remote zone.
•If you select FM (or AM) with the TUNER input source buttons when the source for the remote zone (Zone 2) is set to AM (or FM), the output for the remote zone also changes to AM (or FM).
•
•When you are using the remote zone (Zone 2), 
system operation will not work.
•When you are using the remote zone (Zone 2), the Pure Audio setting will not work.
•When you are not using the remote zone (Zone 2), press the ZONE 2 button and then press the OFF button to turn off the ZONE 2 indicator. (Using the remote controller, press the ZONE 2 button and then the STANDBY button.)
42
