Onkyo TX-NR900E Specifications, Amplifier Section, All channels, total harmonic distortion

Specifications

AMPLIFIER SECTION

Continuous average power output (FTC)

All channels:	110 W per channel min. RMS at 8
	Ω, 2 channels driven from 20 Hz to
	20 kHz with no more than 0.08%
	total harmonic distortion.
	145 W min. RMS at 6 Ω, 2 channels
	driven from 1 kHz with no more
	than 0 . 1% total harmonic
	distortion.
Continuous power output (DIN)	150 W at 6 Ω
Maximum power output (EIAJ)	180 W at 6 Ω
Dynamic power output (stereo)	2 ⋅ 280 W at 3 Ω
	2 ⋅ 220 W at 4 Ω
	2 ⋅ 140 W at 8 Ω
Total Harmonic Distortion:	0.08% at rated power
	0.08% at 1 W output
IM Distortion:	0.08% at rated power
	0.08% at 1 W output
Damping factor:	60 at 8 Ω
Input sensitivity and impedance	2.5 mV, 50 kΩ
PHONO:
LINE (CD, TAPE, DVD,	200 mV, 50 kΩ
VIDEO 1-5):
MULTICHANNEL INPUT
(FRONT L/C/R, SURROUND	200 mV, 50 kΩ
L/R, SURROUND BACK L/R):
(SUBWOOFER):	36 mV, 50 kΩ
COAXIAL 1, 2, 3 (DIGITAL):	0.5 Vp-p, 75 Ω
DVD, VIDEO 1, 2, 3, 4, 5:	1 Vp-p, 75 Ω
	1 Vp-p, 75 Ω (Y)
	0.28 Vp-p, 75 Ω (C)
COMPONENT VIDEO 1, 2:	1 Vp-p, 75 Ω (Y)
	0.7 Vp-p, 75 Ω (PB, PR)
Output level and impedance
Rec out (TAPE, VIDEO 1, 2):	200 mV, 470 Ω
Pre out:	1 V, 470 Ω
ZONE 2 OUT:	100 mV, 470 Ω
VIDEO (VIDEO 1, 2, MONITOR
OUT, ZONE 2 OUT):	1 Vp-p, 75 Ω
S-VIDEO (VIDEO 1, 2,	1 Vp-p, 75 Ω (Y)
MONITOR OUT):
	0.28 p-p, 75 Ω (C)
COMPONENT VIDEO OUT:	1 Vp-p, 75 Ω (Y)
	0.7 Vp-p, 75 Ω (PB, PR)
Phono overload:	120 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency response:	10 Hz to 100 kHz : +1/–3 dB
	(CD in Direct mode)
RIAA deviation:	20 Hz to 20 kHz : ±0.8 dB
Tone Control
Bass:	±10 dB at 50 Hz
Treble:	±10 dB at 20,000 Hz
Signal-to-noise ratio (direct)
Phono:	80 dB (IHF A, 5 mV input)
CD/Tape:	110 dB (IHF A, 0.5 V input)

TUNER SECTION
FM
Tuning range
USA & Canadian models:	87.50–108.00 MHz (100-kHz steps)
Other models:	87.50–108.00 MHz (50-kHz steps)
Usable sensitivity	11.2 dBf, 1.0 µV (75 Ω IHF)
Mono:
	0.9 µV (75 Ω DIN)
Stereo:	17.2 dBf, 2.0 µV (75 Ω IHF)
	23 µV (75 Ω DIN)
50 dB quieting sensitivity	17.2 dBf, 2.0 µV (75 Ω)
Mono:
Stereo:	37.2 dBf, 20 µV (75 Ω)
Capture ratio:	2.0 dB
Image rejection ratio:	85 dB
IF rejection ratio:	90 dB
Signal-to-noise ratio
Mono:	76 dB
Stereo:	70 dB
Alternate channel attenuation:	55 dB
Selectivity:	50 dB (DIN)
AM suppression ratio:	50 dB
Total harmonic distortion
Mono:	0.2%
Stereo:	0.3%
Frequency response:	30 Hz–15 kHz, ±1.0 dB
Stereo separation:	45 dB at 1 kHz
AM	30 dB at 100 Hz–10 kHz
Tuning range
USA & Canadian models:	530 to 1,710kHz (10kHz steps)
Other than world wide models:	522 to 1,611 kHz (9-kHz steps)
Worldwide models:	522 to 1,611 kHz (9-kHz steps) or
	530 to 1,710 kHz (10-kHz steps)
Usable sensitivity:	30 µV
Image rejection ratio:	40 dB
IF rejection ratio:	40 dB
Signal-to-noise ratio:	40 dB
Total harmonic distortion:	0.7%
GENERAL
Power supply
USA & Canadian models:	AC 120 V, 60 Hz
European & Australian models:	AC 230–240 V, 50 Hz
Some Asian models:	AC 220–230 V, 50/60 Hz
Worldwide models:	AC 220–230 and 120 V switchable,
	50/60 Hz
Power consumption
USA & Canadian models:	8.4 A
Other models:	670 W
Dimensions (W ⋅ H ⋅ D):	435 ⋅ 175 ⋅ 459 mm
	17-1/8" ⋅ 6-7/8" ⋅ 18-1/16"
Weight
USA & Canadian models:	17.5 kg (38.6 lbs)
Other models:	18.2 kg (40.1 lbs)

Specifications and features are subject to change without notice.

81