Input Setup
Input source signals
a. Analog/PCM
Analog sources consist of LP records, FM and AM broadcasts, cassette tapes, and the such. PCM (Pulse Code Modulation) is one form of digital audio signals and is recorded directly onto compact discs and DVDs without compression.
b. PCM fs=96k
Digital PCM sources recorded with a sampling rate of 96 kHz.
c. Dolby D (Dolby Digital)
Digital data with
have the 
mark and therefore recorded for
Dialog norm
Dialogue Normalization (Dialog Norm) is feature of Dolby Digital. When playing back software that has been encoded in Dolby Digital, sometimes you may see a brief message in the front panel display that reads Dialog Norm xdB (“x” being a numeric value). Dialogue Normalization serves to let you know if the source material has been recorded at a higher or lower level than usual. For example, if you see the message “Dialog Norm: +4” in the front panel display, to keep the overall output level constant just turn down the volume control by 4dB. In other words, the source material that you are listening to has been recorded 4dB louder than usual. If you do not see a message, then no adjustment of the volume control is necessary.
d. DTS
DTS (Digital Theater System) is compressed digital data with a maximum 
mark.
e. D.F. 2 ch (Digital Format 2 channel)
f. D.F. Mono (Digital Format Monaural)
Monaural digital signals (not including PCM) such as Dolby Digital. DVDs or LDs recorded with monaural sound may be this type of input signal.
Listening Modes
Mono
This mode is for playing old movies where the sound is recorded in monaural or for playing the left and right channels of movies separately that contain different language signals. This mode also allows you to listen to the multiplexed soundtracks on DVDs, and other media that have them.
Pure Audio
Same as the direct mode except that the pure audio mode also turns off the display window, turns off the power supply to the video circuitry, and minimizes the sources of noise. The result is high- fidelity music playback true to the original source.
Note:
In the Pure Audio mode, if any component video signal is presented on the COMPONENT VIDEO INPUT2 jack, it will be output to the COMPONENT OUTPUT jack.
Direct
This mode delivers pure sound with minimum sound quality adjustment and filtration. The sound recorded for the right and left front channels is output to the right and left front speakers only and not output to the subwoofer.
Stereo
This mode has all input sound is output from the left and right front speakers.
The subwoofer is also used for playback.
For the best enjoyment of your home theater, it is recommended that you have front left and right speakers, a center speaker, and surround left and right speakers. However, if you only have front left and right speakers, you can enjoy multichannel audio by using this mode.
This mode controls the characteristics of the sound that reaches each ear to reproduce a
Dolby Pro Logic II
Opposed to Dolby Pro Logic, which had four channels (front left/ right, center, and surround) recorded into two channels with matrix processing and then played back in four channels, Dolby Pro Logic
IIuses a feedback logic circuit to have
Dolby Pro Logic II provides a Movie mode designed for playing movies and a Music mode designed for listening to music. In the Movie mode, the surround channels, which used to provide monaural output over only a narrow frequency range, now provide complete stereo output over the full frequency range. The result is movie viewing with a realistic feel of movement. This mode can be
used with VHS and DVD videos with the 
mark and certain television programs. The Music mode uses the surround channels to provide a natural soundfield that cannot be provided with normal stereo output.
This mode can be used with music compact discs and other stereo sources.
56
