Connecting antennas

Connecting antennas

To use the tuner of TX-NR900/900E, it is necessary to prepare the supplied FM and AM antennas.

Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast.

If better reception cannot be obtained, then placement of an outside antenna is recommended.

Assembling the AM loop antenna

Assemble the loop antenna as shown in the illustration.

Refer to “Connecting the AM loop antenna” below for details on how to connect the loop antenna.

Insert into the hole.

Connecting the AM antenna cable

1.Press down the lever at the antenna terminal.

2.Insert the wire into the terminal hole.

3.Release the lever.

1

2

3

Connecting the included antennas

Connecting the FM indoor antenna:

The FM indoor antenna is for indoor use only. During use, extend the antenna and adjust its orientation until the clearest signal is received. Fix it with push pins or similar items in the position that will cause the least amount of distortion.

If the reception is not very clear with the attached FM indoor antenna, the use of an outdoor antenna is recommended.

Connecting the AM loop antenna:

The AM loop antenna is for indoor use only. Set it in the direction and position where you receive the clearest sound. Put it as far away as possible from the TX-NR900/900E, televisions, speaker cables, and power cords.

If the reception is not very clear with the attached AM indoor antenna, the use of an outdoor antenna is recommended.

FM antenna

(Indoor) AM loop antenna

Other models

PRE OUT

ANTENNA

AUDIO

L

 

 

R

L

 

CENTER

 

 

AM

 

L

 

 

USA and

FM

 

75

 

Canadian

 

 

models

 

 

Strip away the insulation from the end of the cable, and fully insert the stripped end of the cable.

Hint:

Either of the split ends of the AM antenna can be connected to either terminal. Unlike speaker cabling, there is no polarity for AM broadcast signals.

24

Page 24
Image 24
Onkyo TX-NR900E instruction manual Connecting antennas, Assembling the AM loop antenna, Connecting the AM antenna cable

TX-NR900E, TX-NR900 specifications

The Onkyo TX-NR900 and TX-NR900E are advanced A/V receivers that epitomize high-quality audio and video performance for home theater enthusiasts. Released as part of Onkyo's flagship range, these models are designed to deliver a comprehensive and immersive entertainment experience.

One of the standout features of the TX-NR900 is its support for multi-channel audio formats, including Dolby Atmos and DTS:X. This allows for a three-dimensional sound experience that places you right at the center of your favorite movie or music. With the capability to decode various formats, users can enjoy rich, multidimensional soundscapes that enhance their viewing experience.

The TX-NR900 also boasts an impressive power output, with a robust amplification stage capable of driving multiple speaker configurations efficiently. Featuring high-current capability and low-impedance drive, this receiver ensures that audio remains clear and dynamic even at higher volumes. The inclusion of WRAT (Wide Range Amplifier Technology) further enhances audio fidelity, providing a clean sound across the frequency spectrum.

In terms of video capabilities, the TX-NR900 is equipped with advanced HDMI features, including support for 4K video input/output and HDR (High Dynamic Range) compatibility. This means users can enjoy ultra-high-definition resolution with vibrant colors and contrast, making it ideal for modern gaming consoles and streaming devices.

Networking capabilities of the TX-NR900 include built-in Wi-Fi and Bluetooth, allowing users to stream music directly from their smartphones or other compatible devices. Additionally, support for various streaming services, including Spotify, Tidal, and others, broadens the options for music enjoyment.

For users seeking customization, the TX-NR900 includes advanced room calibration technology, which automatically adjusts the receiver's settings to adapt to the acoustic characteristics of the room. This ensures optimal sound delivery based on speaker placement and listening positions.

The TX-NR900E, a European variant, offers similar features, with potential modifications to meet regional standards and requirements. Both models come equipped with a user-friendly interface and intuitive remote control, making it easy to navigate through different inputs and settings.

Overall, the Onkyo TX-NR900 and TX-NR900E represent the pinnacle of home theater technology, combining powerful audio performance, advanced video capabilities, and modern streaming features. They are perfect for audiophiles and cinephiles alike, looking to elevate their home entertainment systems.