Onkyo TX-NR900E instruction manual Index parts and facilities, Digital Input/Output

Index parts and facilities

For more information regarding connection procedures, see pages indicated in brackets [ ].

DIGITAL INPUT/OUTPUT [17-21]

These jacks are for connecting components with digital input and output capabilities. To connect a CD player, see page 17; to connect an MD or CD recorder, see page 17; to connect a DAT deck, see page 17; to connect a DVD player, see page 18; to connect a DVD recorder, see page 20; and to connect a digital satellite tuner, see page 21.

PRE OUT [23, 26, 29]

To use the TX-NR900/900E as a preamplifier, connect a power amplifier to this jack.

ANTENNA [24, 25]

These jacks are for connecting the FM indoor antenna and AM loop antenna that are supplied with the TX-NR900/900E.

ZONE2 AUDIO/VIDEO OUT [26]

These jacks are for connecting the components that will be used in the remote zone (Zone 2).

MONITOR OUT VIDEO/S VIDEO [19]

These jacks are for connecting to the video input jacks on television monitors or projectors.

COMPONENT VIDEO OUTPUT [19]

These jacks are for connecting to the component video input jacks on television monitors or projectors.

ETHERNET (NET-TUNE)

This connector is for connecting to an Ethernet network.

SPEAKERS [23, 26]

These terminals are for connecting the speakers.

AC OUTLETS [28]

This AC outlet is provided to plug in the power cord from another component.

MULTI CH INPUT [29]

This connector is for connecting components with a multi-channel output.

PHONO/CD/TAPE AUDIO IN/OUT [17]

These connectors are for connecting to the audio input and output jacks on audio components. To connect a turntable, see page 17; to connect a CD player, see page 17; and to connect a cassette tape deck, MD recorder, or CD recorder, see page 17.

DVD/VIDEO1-4 IN/OUT [18-21]

These connectors are for connecting to the video input and output jacks on video components. To connect a DVD player, see page 18; to connect a DVD recorder, see page 20; to connect a VCR, see page 19; and to connect a Satellite tuner, see page 21.

COMPONENT VIDEO INPUT1/2 [18-20]

These connectors are for connecting to the component video outputs of video components that have them. To connect a DVD player, see page 18; to connect a DVD recorder, see page 20; and to connect a Satellite tuner, see page 21.

IR IN/OUT [27]

These connectors are for connecting the remote sensor of a multi- room kit (sold separately).

[28]

This jack is for connecting other Onkyo components equipped with

the same terminal.

12V TRIGGER OUT ZONE 2 [29]

This connector is used to connect to the 12V TRIGGER IN terminal of a component in the remote zone (Zone 2) if one has one.

(Other than USA, Canadian and Australian models)

RS232 [28]

This connector is for connecting to the RS-232 port of an external device.

AC INLETS [7]

This connector is for connecting the supplied power cord.

(Worldwide models only)

VOLTAGE SELECTOR [7]

This is only available on the worldwide model. Before connecting the power cord to the wall outlet, be sure to set this to the correct power supply voltage for your region.

15