OPPO Digital DV-983H user manual Mode

S E T U P M E N U O P T I O N S

3.LPCM Rate: To set the maximum Linear PCM output frequency. The options are:

•48K – Supported by most equipment.

•96K – Allows a higher sampling rate and frequency response. It can result in better audio quality. Ensure that the receiver/amplifier can support it.

•192K – Allows the highest sampling rate and frequency response. It can result in the best audio quality. Ensure that the receiver/amplifier can support it.

4.EQ Type: To set the equalization pattern type. Available options are: None, Rock, Pop, Live, Dance, Techno, Classic and Soft.

5.Sound Field: To set the sound field effect. Available options are: Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church.

6.Audio Tone (+/-16): This function raises or lowers the tone (key/pitch) of the audio track. This is useful for playing Karaoke discs and should not be used for regular music listening or movies.

•Press the SELECT button to show the tone control window.

•Press the left/right ARROW buttons to lower or raise the tone/pitch.

•Press the SELECT button to confirm the setting.

7.Pro Logic II: Taking a step further than most DVD players, the OPPO DVD player allows you to configure Dolby Pro Logic II to expand 2-channel source audio into full 5-channel surround sound. Note: Pro Logic II functionality is effective only when Speaker Setup Page > Down- mix is set to “5.1ch” or “7.1ch” and Digital Output is set to “Raw”.

•Press the SELECT button to enter the “Pro Logic II Config” page.

•Press the left ARROW button to exit the “Pro Logic II Config” page.

-- Pro Logic II Config --

Pro Logic II	Off
Mode	Music
Panorama	Off
Dimension	00
Center Width	03

A.Pro Logic II: To turn on or off the Pro Logic II processing. The options are:

•On – Pro Logic II processing is always on

•Off – No Pro Logic II processing

B.Mode: To set the processing mode of Pro Logic II. The options are:

•Music – The surround experience is tailored for multi-channel music playback

•Movie – Emphasis is given to the center channel as two-channel audio is decoded and played back into your 5.1 system

•Pro Logic – This activates decoding and processing of the original Dolby Pro Logic processing with mono-surround channel. We recommend using the Dolby Pro Logic Movie mode in lieu of this 4-channel surround format.

•Auto – Automatically selects processing mode based on the input format

53