OPPO Digital DV-983H user manual Audio-Only Mode, Customized Background Screen

A D V A N C E D O P E R A T I O N S

•Supported USB drives must be formatted with the FAT (File Allocation Table) or FAT32 file system. Drives formatted with NTFS file system are not supported.

•The play can index approximately 600 file and folder names. Disks containing more than 600 files and folders may not play properly. It may take the player longer time to read the contents of a large disk.

•If the USB drive is incompatible, or the player encounters errors while reading the USB drive or flash memory card, the screen displays “Device Error”. In this case please verify that the USB drive is compatible, and try to unplug the device and re-insert again.

•In some cases, an incompatible USB device may cause the player to stop responding. If this occurs simply turn off the power, remove the USB device, and turn the player back on.

•OPPO cannot guarantee compatibility with all USB devices and assumes no responsibility for any loss of data that may occur when connected to this unit.

Audio-Only Mode

DVD-ASACD

You can enjoy higher quality audio by turning off the video processing and output. The Audio-Only mode reduces interference between the video and audio signals.

AUDIO ONLY

1.Press the AUDIO ONLY button on the remote control to turn off video and enter Audio-Only mode. After a short delay, video output will be turned off. The “A. ONLY” icon will be illuminated on the front panel of the DVD player. During the short delay before Audio-Only mode is engaged, you may cancel it by pressing the AUDIO ONLY button again.

2.Press the AUDIO ONLY button again to resume video and cancel Audio-Only mode.

NOTE

Audio-Only mode is cancelled if the unit is switched to STANDBY.

Customized Background Screen

The OPPO DVD player supports customization of the background screen. While playing a movie, you can press the CAPTURE button on the remote

CAPTURE control to capture a scene as the customized background screen of your DVD player. Once a new background is successfully captured, the DVD player will show the customized background screen instead of the OPPO background screen when playback is stopped.

To restore the original OPPO background screen, please set the “Background” item in the “General Setup Page” of the DVD player’s setup menu to “Default”. Refer to page 45 for details about this setup menu item.

44