Installing Oracle Connect on an IBM OS/390 or z/OS Series Platform

6-6 Oracle Application Server Adapter for IMS/TM User’s Guide
da('nnn.TRANSMIT.LIB') [UNIT(unit) VOLUME(volume)]
This extracts the nnn.TRANSMIT.LIB library from the nnn.TRANSMIT.KIT kit to the specified unit and volume. If a unit and volume are not specified, then the library is extracted to the current unit and volume.
3. Run the PREPARE member of the nn.TRANSMIT.LIB library:
ex PREPARE
Follow the instructions in the Response column in Tabl e 6–8 for each entry in the
Screen column.
The following libraries are generated:
nnn.BUILDKIT.LOAD
nnn.BUILDKIT.SRC
nnn.BUILDKIT.GENDEMO
Where nnn is the high-level qualifiers you assigned in step 1.
4. In the nnn.BUILDKIT.SRC library, run the NAVINST member:
ex NAVINST
Follow the instructions in the Response column in Tabl e 6–9 for each entry in the Screen column.
Table 6–8 Installation Prepare Job Prompts and Responses
Screen Response
DO YOU WANT TO USE SMS MANAGED
STORAGE FOR THIS INSTALLATION Y/N [N]:
If you want to manage the storage using SMS, then answer
Y, otherwise answer N.
ENTER THE STORCLASS FOR INSTALLATION
TEMP DATASETS [ ]:
This prompt is displayed only if SMS is used to manage the
installation (you answered Y to the first prompt).
Enter the storage class
ENTER THE UNIT NAME FOR INSTALLATION
TEMP DATASETS [3390]:
If a storage class is not specified, then enter the unit name
for temporary datasets used during the installation
procedure
ENTER THE VOLUME NAME FOR
INSTALLATION TEMP DATASETS:
This prompt is displayed only if SMS is not used to manage
the installation (you answered N to the first prompt).
The volume name for temporary datasets used during the
installation procedure
ENTER THE OUTPUT CLASS FOR
INSTALLATION OUTPUT [A] :
Enter the output class only if you do not want the default
class used (the default is A)
DO YOU WANT TO USE THE DEFAULT JOB
CARD Y/N [Y]
A job card is displayed. If you want to use a replacement
card, then it must be entered as it will appear in the job. You
can enter up to six lines. Enter a blank card to end input.
If you do not enter a card, then the Oracle Connect default
card is used.
DO YOU WANT TO PERFORM A MANUAL
(M) OR AUTOMATIC (A) INSTALLATION [A]:
If you want to review the JCL used to install Oracle Connect,
before it is submitted, then respond M for a manual
installation.
PLEASE REVIEW AND SUBMIT FOR
EXECUTION THE
HLQ.TRANSMIT.LIB(INSTJO)
This prompt is displayed only if a manual installation is
requeshen Tw[(2010006ect Tc4iew th06e)]TJ12.30.02 Tm-0.0