Workspaces
Advanced Tuning of the Daemon C-9
WS Server
Using the WS Server tab, you specify the features that control the operation of the
servers started up by the workspace and allocated to clients.
For example, you can configure the workspace to start up a number of servers for
future use, prior to any client request, instead of starting each server when a request is
received from a client.
The WS Server tab is accessed as follows:
1. From the Start menu, select Programs, Oracle, and then select Studio.
2. Select the required computer from the Configuration Explorer.
3. Right-click the computer and select Open Runtime Perspective.
4. Expand the Daemons node to display the workspaces in the Runtime Explorer.
5. Right-click the workspace and select Edit Workspace Configuration.
6. Click the WS Server tab.
7. After making changes to the workspace, right-click the daemon and select Reload
Configuration.
Server type This field is not applicable for use with OracleAS Adapters
for IMS/TM.
Works pa ce b in din g
name
This field is not applicable for use with OracleAS Adapters
for IMS/TM.
Timeout parameters The time the client waits for the workspace server to start.
If the workspace server does not start within this period,
then the client is notified that the server did not respond.
Specifying the timeout here overrides the default setting,
specified in the Control section.
See Also: "Daemon Control" on page C-1 for details about
the Daemon Control section.
Client idle timeout The maximum amount of time a workspace client can be
idle before the connection with the server is closed.
Connect timeout The time the client waits for a workspace server to start. If
the workspace server does not start within this period,
then the client is notified that the server did not respond.
Notes:
■You can also change daemon settings using the Configuration
Explorer, by selecting a computer and scrolling the list to the
required daemon. Right-click the daemon and select Edit
Daemon.
■Changes made to the daemon configuration are not
implemented. They are only implemented after the
configuration is reloaded using the Reload Configuration
option in the Runtime Manager.
Table 6–21 (Cont.) WS Info tab Components
Field Description