Installing Oracle Connect on an IBM OS/390 or z/OS Series Platform
6-8 Oracle Application Server Adapter for IMS/TM User’s Guide
The installation is completed. All JCL jobs and REXX procedures are written to the
INSTROOT.USERLIB library. INSTROOT is the high-level qualifier for the installation.
Postinstallation Instructions
The following postinstallation tasks must be done to work with Oracle Connect:
■Postinstallation Procedures
■Starting the Daemon
■Setting Up Oracle Connect for Reentrancy

Postinstallation Procedures

Perform the following procedures after completing the installation to configure Oracle
Connect.
■Allocate a dataset for INSTROOT.DEF.BRANDBIN, using 1 track and with
RECFM=VB and LRECL=256. The block size is 6233.
INSTROOT is the high-level qualifier where Oracle Connect is installed.
■Using FTP, copy the BRANDBIN file, in binary mode, from the
Oracle Connect\IMSTM Legacy Adapter directory in the installation CD to
the mainframe, to INSTROOT.DEF.BRANDBIN.
■Define the LOADAUT library as an APF-authorized library.
Table 6–10 IMS/TM Adapter-Specific Installation Prompts and Responses
Screen Response
ENTER THE ISPF LOAD LIBRARY NAME
[ISP.SISPLOAD] :
Enter the ISPF load library name only if you do not want the
default
PLEASE CONFIRM (YES/NO/QUIT) [YES] : Confirm the entered details
ENTER THE OUTPUT CLASS FOR
INSTALLATION OUTPUT [A] :
Enter the output class for Oracle Connect output. Assigning
a device that is set on HOLD prevents the loss of log
information when the Oracle Connect started tasks finish
(the default is A).
DO YOU WANT TO USE THE DEFAULT JOB
CARD Y/N [Y]
A job card is displayed. If you want to use a replacement
card, then it must be entered as it will appear in the job. You
can enter up to six lines. Enter a blank card to end input.
If you do not enter a card, then the Oracle Connect default
card is used.