Installing Oracle Studio

Installing and Configuring OracleAS Adapter for IMS/TM 6-13

The installation is completed. All JCL jobs and REXX procedures are written to the

INSTROOT.USERLIB library. INSTROOT is the high-level qualifier for the installation.

After completing the installation, perform postinstallation tasks, as described in

"Postinstallation Instructions" on page 6-8.

Installing Oracle Studio

This section explains how to install Oracle Studio from the CD-ROM.

DO YOU WANT ORACLE CONNECT FOR
LEGACY ADAPTER TO WORK WITH IMS/DB
UNDER CICS (YES/NO) [NO]:
If you want to access IMS/DB data under CICS, using
OracleAS Adapter for IMS/DB, then respond YES.
ENTER THE CICS EXCI LOAD LIBRARY NAME
[CICSTS13.CICS.SDFHEXCI]:
If you responded YES to working with IMS/DB under CICS,
then enter the CICS EXCI load library name only if you do
not want the default.
PLEASE CONFIRM (YES/NO/QUIT) [YES]: If you responded YES to working with IMS/DB under CICS,
then confirm the entered details.
DO YOU WANT ORACLE CONNECT FOR
LEGACY ADAPTER TO WORK WITH CICS
APP ADAPTER (YES/NO) [YES]:
Answer YES to this prompt
ENTER THE CICS EXCI LOAD LIBRARY NAME
[CICSTS13.CICS.SDFHEXCI]:
Enter the CICS EXCI load library name only if you do not
want the default.
PLEASE CONFIRM (YES/NO/QUIT) [YES] Confirm the entered details
THE VSAM DRIVER IS INSTALLED
AUTOMATICALLY. DO YOU ALSO WANT
ORACLE CONNECT FOR LEGACY ADAPTER
TO WORK WITH VSAM UNDER CICS
(YES/NO) [NO]:
Answer YES to this prompt if you have Oracle Connect for
VSAM already installed and you want to access VSAM data
under CICS.
ENTER THE CICS EXCI LOAD LIBRARY NAME
[CICSTS13.CICS.SDFHEXCI]:
If you responded YES to working with VSAM under CICS,
then enter the CICS EXCI load library name only if you do
not want the default.
PLEASE CONFIRM (YES/NO/QUIT) [YES]: If you responded YES to working with VSAM under CICS,
then confirm the entered details.
ENTER THE ISPF LOAD LIBRARY NAME
[ISP.SISPLOAD]:
Enter the ISPF load library name only if you do not want the
default.
PLEASE CONFIRM (YES/NO/QUIT) [YES]: Confirm the entered details
ENTER THE OUTPUT CLASS FOR
INSTALLATION OUTPUT [A]:
Enter the output class for Oracle Connect output. Assigning
a device that is set on HOLD prevents the loss of log
information when the Oracle Connect started tasks finish
(the default is A).
DO YOU WANT TO USE THE DEFAULT JOB
CARD Y/N [Y]
A job card is displayed. If you want to use a replacement
card, then it must be entered as it will appear in the job. You
can enter up to six lines. Enter a blank card to end input.
If you do not enter a card, then the Oracle Connect default
card is used.
Table 6–13 (Cont.) IMS/TM Adapter Installation Prompts and Responses
Screen Response