Performing initial settings

$ Setting the recording time mode and number of cameras

1 2•7 3•5 4•6

2 1 ∫ ; 4 3

43

<

6 5

H

H

 

2

1

1 Set the power switch to ON.

2 Set the PROGRAM switch to the MENU position. The setting menu screen is shown on the TV monitor.

3 Press the PAGE (+) or PAGE (–) button to display the P3 RECORDING T-MODE & CAMERA screen. The flashing items are ones that can be set.

Fixed at OFF.

The number of cameras to be used is displayed automatically here.

4 Follow the steps below to set the recording time mode and number of cameras.

O Use the (4), (3), (2) and (1) SHIFT buttons to move the flashing part to the item whose setting is to be changed.

O Press the (+) and (–) SET buttons to change the setting.

On the P3 RECORDING T-MODE & CAMERA screen, set the number of cameras to be used and their recording time modes for RT0 through RT7 in the REC TYPE column ahead of time.

Different kinds of recordings can be undertaken by setting these two items when normal recording or timer recording is to be performed.

<Notes>

O For RT0, T-MODE (recording time mode) is fixed at OFF.

O For RT7, the setting for the number of cameras to be used is fixed at 1 unit for C1.

The cameras to be used are set here.

The cameras are set in pairs: C1-C2, C3-C4 and so on up to

C15-C16.

“Y” (YES) is set for each pair of cameras that is to be used. A black burst signal (black screen) is recorded if no video signals are supplied from a camera even when “Y” (YES) has been set for that camera.

Fixed at 01 C1.

The recording time mode is set here.

14