Panasonic AG-DTL1 Menu page P6

Setting menus

Menu page P6

[TAPE REMAIN]		P6	TAPE REMAIN screen
LEVEL	OFF
BUZZER	OFF		Menu item	Description of function
[REC REVIEW]
AUTO	OFF
			LEVEL	For setting at what point REMAIN is to flash on the display tube and
ERROR BUZZER	OFF
[ERROR WARN BUZZER]				the remaining tape warning is to be displayed when the tape-end
MODE	OFF			position is about to be reached. (When using a 120-minute tape)
[REC WARNING]	OFF			The REMAIN flashing is released when any button is pressed.
REC LOSS BUZZER				OFF : The remaining tape warning is not displayed.
				2% : The warning is displayed when the remaining tape amount is
				less than approximately 2%.
				10% : The warning is displayed when the remaining tape amount is
				less than approximately 10%.
				20% : The warning is displayed when the remaining tape amount is
				less than approximately 20%.
				30% : The warning is displayed when the remaining tape amount is
				less than approximately 30%.
			BUZZER	For setting whether the buzzer is to sound when the tape-end
				position is about to be reached. The buzzer is stopped when any
				button is pressed.
				ON : The buzzer sounds at the position which was set for the
				LEVEL item.
				OFF : The buzzer does not sound.
				The underlining indicates the factory mode setting.

REC REVIEW screen

Menu item	Description of function
AUTO	For setting automatic REC REVIEW.
	(This function plays back the recording after recording for a specific
	time in order to detect whether the proper video level is being
	maintained during recording.)
	ON : REC REVIEW is performed automatically.
	If the level detected is found to be unacceptable, the tape is
	loaded and unloaded three times, and REC REVIEW is
	automatically performed again. If it is still unacceptable even
	after this, recording is performed.
	OFF : REC REVIEW is not performed automatically.
ERROR BUZZER	For setting whether the buzzer is to sound when it is discovered by
	REC REVIEW that the proper video level was not maintained.
	ON : The buzzer sounds. It is stopped when any button is pressed.
	OFF : The buzzer does not sound.
	The underlining indicates the factory mode setting.

46