RS-232C

O Query control commands

Data transmitted by PC

Data returned from unit in response

Description of command

 

 

 

 

 

 

[STX] QIP:n [ETX]

[STX] LIPn:data1:data2:t [ETX]

Queries the internal timer recording setting.

 

 

 

[STX] QIR [ETX]

[STX] LUImdata [ETX]

Queries the user ID of the playback tape.

 

 

 

[STX] QIW [ETX]

[STX] LIWabcdefgh:ijklmnop [ETX]

Queries the settings of the weekly timer and daily timer.

 

 

 

 

 

Queries the setting for the operation mode that is to be

[STX] QLA:m [ETX]

[STX] LAmn [ETX]

established when an alarm signal has been input at the

tape-end position and for the duration of the alarm

 

 

 

 

recording and/or sensor recording.

 

 

 

 

 

Queries the setting of the timing at which the video signals

[STX] QMS [ETX]

[STX] LMSm [ETX]

which are supplied from the camera and which are to be

output from the rear panel VIDEO OUT connector are to be

 

 

 

 

switched.

 

 

 

[STX] QLD:n [ETX]

[STX] LANnn:data1:data2 [ETX]

Queries the ALARM RECALL data.

 

 

 

 

 

Queries the setting for alarm recording or sensor recording

[STX] QLE [ETX]

[STX] LRIm [ETX]

if an alarm signal has been input while repeat recording is

 

 

underway or while the tape is being rewound.

 

 

 

[STX] QLH [ETX]

[STX] LHRhhhh [ETX]

Queries the current value of the hour meter.

 

 

 

[STX] QLM [ETX]

[STX] LRMm [ETX]

Queries the timer recording mode setting.

 

 

 

[STX] QLP:n [ETX]

[STX] LPLnn:data1:data2 [ETX]

Queries the POWER LOSS MEMORY data.

 

 

 

[STX] QLT [ETX]

[STX] LTMm [ETX]

Queries the setting of the recording/playback time mode.

 

 

 

[STX] QLZ [ETX]

[STX] LBZm [ETX]

Queries the setting of the buzzer operation during alarm

recording or sensor recording.

 

 

 

 

 

[STX] QMA [ETX]

[STX] LMAm [ETX]

Queries the search mode.

 

 

 

[STX] QMP [ETX]

[STX] LMPp:c0c1c2c3 [ETX]

Queries the settings for switching the screen display (4-in-1

or 1-screen display) and for the camera numbers.

 

 

 

 

 

[STX] QNL [ETX]

[STX] LLLm [ETX]

Queries the synchronization system setting for the cameras

to be connected.

 

 

 

 

 

 

 

Queries the setting of the video signals which are to be

[STX] QNR [ETX]

[STX] VNRm [ETX]

output to the monitor screen in all modes except for the

 

 

recording mode.

 

 

 

[STX] QOP [ETX]

[STX] data [ETX]

Queries the unit’s operation mode.

 

 

 

[STX] QOR [ETX]

[STX] ORm [ETX]

Queries the results yielded by performing REC REVIEW.

 

 

 

[STX] QOS [ETX]

[STX] OPSdata [ETX]

Queries the operation modes.

 

 

 

[STX] QPB:m [ETX]

[STX] LPBm:r:data [ETX]

Queries playback tape information.

 

 

 

[STX] QRA [ETX]

[STX] RAm [ETX]

Queries the ACK (acknowledge) code response setting.

 

 

 

 

 

Queries the setting of the buzzer operation in the event that

[STX] QRE [ETX]

[STX] LRBm [ETX]

the unit is kept in the stop mode for a prolonged period of

 

 

time.

 

 

 

[STX] QRF [ETX]

[STX] LNRf:p:t [ETX]

Queries the settings of the recording mode, picture quality

and recording type.

 

 

 

 

 

62