Useful functions
Alarm memory recall is a function for storing in the memory those dates/times and number of occasions on which the alarm recording and sensor recording functions were activated.
Power loss memory recall is a function for storing in the memory those dates/times and number of occasions on which the primary power supply was shut off due to a power outage, etc.
1 2 | RESET button |
2 1 ∫ ; 4 3
43
<
6 5 | H | H |
| 2 | 1 |
1 Set the POWER switch to ON.
2 Set the PROGRAM switch to the MENU position while holding down the STOP button.
The ALARM RECALL screen and POWER LOSS MEMORY screen now appear.
The alarm number/s and dates/times when the alarm signal was input are displayed on the ALARM RECALL screen.
The number of times the primary power source has been shut off and the dates/times when this happened are displayed on the POWER LOSS MEMORY screen.
(Data is displayed in sequence with the latest at the top of the screen.)
[ALARM RECALL] |
| ||
29 | 12 | – 30 – 2000 | 3:15 |
28 | 12 | – 04 – 2000 | 12:10 |
27 | 10 | – 25 – 2000 | 2:20 |
26 | 9 | – 10 – 2000 | 2:30 |
25 | 8 | – 11 – 2000 | 6:55 |
24 | 5 | – 10 – 2000 | 3:22 |
23 | 4 | – 11 – 2000 | 6:55 |
22 | 3 | – 10 – 2000 | 3:22 |
[POWER LOSS MEMORY] |
| ||
14 | 12 | – 01 – 2000 | 12:00 |
13 | 10 | – 05 – 2000 | 10:30 |
12 | 08 | – 10 – 2000 | 9:20 |
11 | 3 | – 02 – 2000 | 7:00 |
The following display appears when alarm recording was never performed or when the primary power supply was never shut off.
[ALARM RECALL]
¢¢
¢¢
¢¢
¢¢
¢¢
¢¢
¢¢
¢¢
[POWER LOSS MEMORY]
¢¢
¢¢
¢¢
¢¢
<Notes>
O Data for up to 8 alarms is stored on the ALARM RECALL screen whereas data for up to 4 power losses is stored on the POWER LOSS MEMORY screen.
O A total of 99 alarms and 99 power losses are stored in the memory.
When 99 is exceeded, the count returns to “00.”
O As with alarm recordings, the sensor recordings are stored as alarm memory data.
O The alarm memory data and power loss memory data are stored in the memory circuit inside the unit. They are not recorded on the tape.
O When the PROGRAM switch is set to any position except MENU, the ALARM RECALL screen and POWER LOSS MEMORY screen displays are cleared.
O When the RESET button is pressed while the ALARM RECALL screen is displayed, the memory can be cleared, but the POWER LOSS MEMORY screen is not cleared.
[ALARM RECALL]
¢¢
¢¢
¢¢
¢¢
¢¢
¢¢
¢¢
¢¢
[POWER LOSS MEMORY] |
| |||
14 | 12 | – 01 | – 2000 | 12:00 |
13 | 10 | – 05 | – 2000 | 10:30 |
12 | 08 | – 10 | – 2000 | 9:20 |
11 | 3 | – 02 | – 2000 | 7:00 |
26