Parts and their functions

=PAUSE STILL button

Press to initiate rec-pause or still-picture playback. When the unit remains in the pause or still-picture playback mode for more than a prescribed period of time, it is automatically set to the stop mode in order to protect the tape.

When the PROGRAM switch is at the MENU position, this button functions as the SHIFT (3) button to select the items on the setting menu screen.

When the PROGRAM switch is at the TIME ADJ position, the button moves the screen display position upward.

>TIME MODE buttons

Press to select the recording time mode.

3H : 3-hour recording mode

9H : 9-hour recording mode

12H : 12-hour recording mode

18H : 18-hour recording mode

24H : 24-hour recording mode

48H : 48-hour recording mode

72H : 72-hour recording mode

96H : 96-hour recording mode

120H : 120-hour recording mode

180H : 180-hour recording mode

240H : 240-hour recording mode

360H : 360-hour recording mode

480H : 480-hour recording mode

960H : 960-hour recording mode

When the PROGRAM switch is at the MENU position, these buttons function as the SET (+) and

(–)buttons to select the settings for the setting menu items.

?RESET button

Press while the counter value is shown on the display tube by the COUNTER button to reset the CTL counter.

When the camera number is shown on the display tube by the COUNTER button during playback, this button is used to switch the monitor screen between 1-screen playback and 4-screen playback.

@COUNTER button

Used to switch the display mode on the display tube.

Each time the COUNTER button is pressed, the mode is switched as follows.

Camera number display:

The current camera number is displayed.

CAMERA

1

2

3

4

5

6

7

8

9

10

11

12

 

Clock display:

The current time is displayed.

TIMETIME

24-hour display

12-hour display

Counter display:

The tape counter is displayed.

COUNT

Pass display:

This indicates the number of times (passes) repeat recording has been performed when repeat recording has been set.

PASS

ASEARCH button

Press to select the search mode.

Each time this button is pressed in the counter display mode, the search mode is switched, and one of the following mode lamps lights on the display tube:

M : Memory stop mode

AS : Alarm search mode

When the SEARCH button is pressed while the time is displayed on the display tube by the COUNTER button, the time search mode is set, and “S” lights on the display tube.

B:00 button

Press to set the seconds digits of the time to “00.” The seconds are reset to “00” when this button is pressed while the display shows 0 to 29 seconds, and they are carried up to 1 minute and set to “00” when it is pressed while the display shows 30 to 59 seconds.

CPROGRAM switch

Used to display the menu and adjust the time. Keep this switch at OFF for normal operation.

MENU:

The setting menu screen is displayed.

When the switch is set to the MENU position while holding down the STOP button, the alarm screen or power loss screen appears.

TIME ADJ:

Set the switch to this position when adjusting the time or adjusting the screen display position.

8