Setting menus
Menu page P7[TERMINAL INPUT SELECT] |
| P7 | TERMINAL INPUT SELECT screen | |
|
|
| ||
EXT TIMER IN | OFF |
|
|
|
TIME ADJUST IN | 9:00 |
| Menu item | Description of function |
[TERMINAL OUTPUT SELECT] |
| |||
|
|
| ||
ALARM/SENSOR OUT | CONTINUE |
|
|
|
| EXT TIMER IN | For setting whether the signals from the external timer connected to | ||
ERROR WARN/REC OUT | WARNING |
| ||
EXT TIMER OUT | START 0:00 |
|
| the rear panel terminal section are to be acknowledged in the |
[VIDEO OUT SEQUENCE] | END 0:00 |
|
| external timer recording mode. |
2s |
|
| ON : The signals from the external timer are acknowledged. | |
SW INTERVAL |
|
| OFF : The signals from the external timer are not acknowledged. | |
BYPASS CAMERA | OFF |
|
| |
|
| Select OFF when using an external timer which has been | ||
BLACK MATTE | OFF |
|
| |
|
| connected to the unit’s power cord. | ||
LL CAMERA | OFF |
|
| |
[EXT SWITCHER] |
|
|
|
|
|
| TIME ADJUST IN | For setting the time to be set when signals have been input from the | |
MODE | VIDEO OUT |
| ||
|
| component connected to TIME ADJ IN on the rear panel terminal | ||
|
|
|
| |
|
|
|
| section. |
|
|
|
| 00:00 to 23:59, RESET |
|
|
|
| Factory setting mode (9:00) |
|
|
|
| <Notes> |
|
|
|
| OThe seconds are fixed at “00.” |
|
|
|
| OWhen signals are input after RESET has been set, the minutes of |
|
|
|
| the time are set to “00.” |
|
|
|
| The minute setting is returned to “00” while it is between 0 and 15 |
|
|
|
| minutes when signals are input. |
|
|
|
| The hour is carried up and the minutes are set to “00” while the |
|
|
|
| setting is between 45 and 59 minutes when signals are input. |
|
|
|
|
|
|
|
|
| The underlining indicates the factory mode setting. |
TERMINAL OUTPUT SELECT screen
Menu item |
| Description of function |
|
| |
ALARM/SENSOR | For setting how the control signals are to be output to the component | |
OUT | connected to ALARM OUT on the rear panel terminal section when | |
| alarm recording or sensor recording is performed. | |
| CONTINUE : The control signals continue to be output even after | |
|
| recording. |
| ALARM REC : The control signals are output only during alarm | |
|
| recording or sensor recording. |
|
| |
ERROR WARN/ | For setting how the control signals are to be output to the component | |
REC OUT | connected to WARNING/REC OUT on the rear panel terminal | |
| section when a problem has occurred in the unit. | |
| WARNING : The control signals continue to be output. | |
| REC | : The control signals are output only during recording. |
|
| |
EXT TIMER OUT | For setting the START time and END time at which the control | |
| signals are to be output to the component connected to EXT TIMER | |
| OUT on the rear panel terminal section. | |
| ||
| <Note> |
|
| The control signals are not output when the same time has been set | |
| for both the START and END times. | |
|
| |
| The underlining indicates the factory mode setting. | |
48