Useful functions
This function is used to search for a particular recording section by designating its date and time.
|
|
|
|
| RESET button |
1 | 5 | 4 |
|
| “S” lights. |
|
|
|
|
| TIME |
|
|
|
|
| S |
2 | 1 | ∫ | ; | 4 | 3 |
|
| ||||
|
| 4 | 3 |
|
|
|
|
|
|
| < |
6 | 5 | H | H |
|
|
21
3 2
1 Set the POWER switch to ON, and insert the cassette tape.
2 Press the COUNTER button to establish the time display mode.
3 Press the SEARCH button.
“S” lights on the display tube, and the TIME DATE SEARCH screen appears on the TV monitor.
The time at which the recording was ended is shown on the TIME DATE SEARCH screen. When the tape is played back, the date and time recorded on the tape are displayed.
When the RESET button is now pressed, the display changes to the time at which the recording was started.
5 Press the PLAY button or REV PLAY button.
The recording section with the designated date and time is now searched.
<Notes>
O The tape comes to a stop at its end or start if no recording section with the date and time was found as a result of the search.
O When the tape is stopped during recording, it will stop at the border between the new recording and old recording, and the continuity in the date and time recorded on the tape will be lost.
In this state, searches may not be performed properly.
When the date or time to be searched is in the newly recorded section, it is recommended that the REV PLAY button be pressed. By pressing this button, the tape is returned a little in the reverse direction, the date and time data is loaded, and the search is performed using this data as a reference.
6 To release the time/date search mode, press any of the function buttons.
| [TIME DATE SEARCH] | |
12 | – 25 | 10 : 25A |
RESET | : REC START TIME PRESET | |
PLAY | : SEARCH START | |
4 Follow the steps below to set the search date and time.
O Use the (2) and (1) SHIFT buttons to move the flashing part to the item whose setting is to be changed.
O Press the (+) and
28