Features

Built-in frame switcher for supporting 16 cameras O The unit also supports asynchronous cameras.

O The unit enables recording after the cameras are switched over automatically as dictated by the recording time mode.

O During recording, the cameras can be switched and their images viewed on a TV monitor at a time other than the recording timing which has been set.

Digital recordings with a high picture quality Digital recordings with a high picture quality can be made on S-VHS tapes. The incorporation of high- performance A/D and D/A circuitry means that high- quality digital recording is possible even when recording after switching from one camera to another. O High picture quality mode: 520 lines for horizontal

resolution, 50 dB for S/N ratio

O Standard picture quality mode: 380 lines for horizontal resolution, 50 dB for S/N ratio

Wide selection of recording time modes

O There is a choice of 14 different recording time modes.

3 hours, 9 hours, 12 hours, 18 hours, 24 hours, 48 hours, 72 hours, 96 hours, 120 hours, 180 hours, 240 hours, 360 hours, 480 hours and 960 hours

O It is possible to switch between frame recording and field recording.

Camera-specific playback

During playback, any camera can be selected and its recording played back. During cue or review, as well, any camera can be selected and its recording played back.

Playback with 4 pictures simultaneously shown on the screen

The pictures recorded by four of the cameras can be selected and, by dividing the TV monitor screen into four parts, all of the four pictures can be played back at the same time on the respective parts of the screen.

Date/time search function

The recording date and time (month / day / hours / minutes) can be selected to initiate a search of the recorded data.

Alarm search function

Recorded data that includes alarm recordings can be searched.

High reliability and high durability

O IQ mechanism with top-notch reliability and durability

O Stable tape travel achieved using a 2DD reel motor O Automatic head cleaning function for cleaning the

head cylinder each time a tape is loaded

Space-saving design with 38 cm width and vertical installation capability

The unit can be installed upright on its left-side panel and secured using the special-purpose mounting brackets (optional accessory STEN-B6730).

O Do not install the unit upright on its right-side panel. This may cause the unit to malfunction.

On-screen setting functions

The unit’s many and varied functions can be set on the monitor screen.

Other features

O 75Ω termination ON/OFF function provided for camera input (16) connectors

O Switching between 8 camera input connectors and 8 camera loop-through outputs possible

O RS-232C control facility

O Audio recording (in the 3-hour to 24-hour time modes)

O Simple clock adjustment functions

O Recording time and operating camera setting function

O Diverse internal timer and external timer functions

4