Performing initial settings
If the clock is running fast or slow, follow the steps below to adjust it.
$ Simple time adjustment
When the clock is running up to 30 seconds fast or slow
When the clock is running up to 15 minutes fast or slow
1 2 |
|
| 1 2•4 | 3 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 1 ∫ ; 4 3
43
<
6 5 | H | H |
| 2 | 1 |
2 1 ∫ ; 4 3
43
<
6 5 | H | H |
| 2 | 1 |
1 Set the power switch to ON.
2 The second digits of the time are reset to “00” when the 00: button is pressed in synchronization with the time signal, etc.
They are reset to “00” when the button is pressed while the display shows 0 to 29 seconds. They are carried up to 1 minute and set to “00” when it is pressed while the display shows 30 to 59 seconds.
1 Set the power switch to ON.
2 Set the PROGRAM switch to the “adjust time” position.
The counter display shows the current time, and the “minutes” digits flash.
3 The minute and second digits of the time are reset to “00:00” when the RESET button is pressed in synchronization with the time signal, etc.
They are reset to “00:00” when the button is pressed while the display shows 0 to 14 minutes. They are carried up to 1 hour and set to “00:00” when it is pressed while the display shows 45 to 59 minutes.
4 Upon completion of the settings, set the PROGRAM switch to the OFF position.
12