Panasonic AG-DTL1 manual 86

RS-232C

$ Query control commands

Data transmitted by PC	Data returned from unit in response		Description of command
[STX] QDA [ETX]		[STX] LDAm [ETX]	Queries the setting for how the control signals are to be
	Parameter		output to the component connected to ALARM OUT on the
	m = C: CONTINUE		rear panel terminal section when alarm recording or sensor
		The control signals continue to	recording (or both) is performed.
		be output even after recording.
		A: ALARM REC
		The control signals are output
		only during alarm recording or
		sensor recording (or both).
[STX] QDB [ETX]		[STX] DBm [ETX]	Queries the colors of the characters which are to be
	Parameter		displayed on the monitor screen.
	m = B: BLACK
		W: WHITE
[STX] QDD [ETX]		[STX] DDSd:t:m:r [ETX]	Queries the items which are to be displayed on the monitor
	Parameter		screen.
	d =	N or F (date)
	t =	N or F (time)
	m = N or F (recording time mode)
	r =	N or F (REC/ALARM)
		N: ON (displayed)
		F: OFF (not displayed)
[STX] QDF [ETX]		[STX] DFCm [ETX]	Queries the display mode of the display tube.
	Parameter
	m = C: (COUNT) counter display
		I: (TIME) clock display
		M: (CAMERA) camera number
		display
		P: (PASS) pass display
[STX] QDM [ETX]		[STX] DMSt:m:n [ETX]	Queries the time display mode (12-hour or 24-hour system).
	Parameter
	d =	T (fixed)
	m = M: AM/PM display
		H: 24-hour display
	n =	0—9: VTR ID No.
		This unit does not have a function
		for displaying the VTR ID No. so
		any number (which is not
		determined) between 0 and 9 is
		returned.
[STX] QDO [ETX]		[STX] LDOdata1:data2 [ETX]	Queries the setting of the start and end times at which the
	Parameter		control signals are to be output to the component connected
	data1 = hhmm (start time)		to the EXT TIMER OUT terminal on the rear panel.
	data2 = hhmm (end time)
	hh = 00—23: Hours (24-hour system)
	mm = 00—59: Minutes

86