Panasonic AG-DTL1 manual 66

RS-232C

$ Display control commands

	Data transmitted by PC	Data returned from unit in response	Description of command
	[STX] DBB [ETX]	[STX] DBB [ETX]	Sets black as the color of the characters displayed on the
			monitor screen.
			<Note>
			This command is not acknowledged while a search control
			command is being processed.
	[STX] DBW [ETX]	[STX] DBW [ETX]	Sets white as the color of the characters displayed on the
			monitor screen.
			<Note>
			This command is not acknowledged while a search control
			command is being processed.
	[STX] DDS:d:t:m:r [ETX]	[STX] DDS [ETX]	Sets the display items on the monitor screen.
Parameter			<Note>
d =	N or F (date)		This command is not acknowledged while a search control
t =	N or F (time)		command is being processed.
m = N or F (recording time mode)
r =	N or F (REC/ALARM)
	N: ON (displayed)
	F: OFF (not displayed)
	[STX] DFC:m [ETX]	[STX] DFC [ETX]	Sets the display mode of the display tube.
Parameter			<Note>
m = C: (COUNT) counter display			This command is not acknowledged while a search control
	I: (TIME) clock display		command is being processed.
	M: (CAMERA) camera number
	display
	P: (PASS) pass display
	[STX] DMS:d:m:n [ETX]	[STX] DMS [ETX]	Sets the time display mode (12-hour or 24-hour system).
Parameter			<Note>
d =	T (fixed)		This command is not acknowledged while a search control
m = M: AM/PM display			command is being processed.
	H: 24-hour display
n =	0—9: VTR ID No.
	This unit does not have a
	function for displaying the VTR
	ID No. so any number between
	0 and 9 may be sent.
	[STX] DPP:mm [ETX]	[STX] DPP [ETX]	Sets the position where the characters are to be displayed
Parameter			on the monitor screen.
mm = C: Center			<Note>
	LB: Bottom left		This command is not acknowledged while a search control
	LT: Top left		command is being processed.
	RB:Bottom right
	RT: Top right

66