
LEVEL 6/6 Screen
This page performs the camera setup level 6 settings.
– LEVEL 6/6 | – | |
H PHASE COARSE | :07 | |
H PHASE FINE | :128 | |
SC PHASE COARSE :0 | ||
SC PHASE FINE | :128 | |
A. lRlS | LEVEL | :078 |
A. lRlS | PEAK/AVE | :059 |
A. IRIS MODE | :NORM1 | |
S. lRlS | LEVEL | :073 |
Item | Variable | VF |
| range | display |
H PHASE | 0 | ENG |
COARSE | 7 |
|
|
| |
| 15 |
|
H PHASE FINE | 0 | ENG |
| 128 |
|
| 255 |
|
SC PHASE | 0 | ENG |
COARSE | 3 |
|
|
| |
SC PHASE FINE | 0 | ENG |
| 128 |
|
| 255 |
|
A.IRIS LEVEL | 0 | ENG |
| 78 |
|
| 100 |
|
A.IRIS | 0 | ENG |
PEAK/AVE. | 59 |
|
|
| |
| 100 |
|
A.IRIS MODE | NORM1 | ENG |
| NORM2 |
|
CENTR
S.IRIS LEVEL 0 ENG 73
100
Remarks
H phase rough adjustment during GENLOCK mode.
H phase fine adjustment during GENLOCK mode.
SC phase rough adjustment during GENLOCK mode.
SC phase fine adjustment during GENLOCK mode.
Auto iris target value setting
Auto iris peak: average value ratio setting
Auto iris mode selection
NORM1: Light metering over entire screen (except for edges).
NORM2: Light metering over entire screen (except for top).
CENTR: Light metering which is focused solely on the screen center. The iris value which matches the subject is set for this mode even when the brightness of the subject at the center differs from that at the screen edges.
Super iris target value setting (Backlight compensation mode)
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the ENG menu.
- 1 1 9 -