Shooting (Recording)/Playback Function Section (2)
CC/ND FILTER (filter selector) knob
This selects the filter to match the light source which is illuminating the subject.
If the setting of this knob is changed when the menu display mode has been set to “3” (default setting), the new setting will appear for about 3 seconds on the setting change message dis- play area of the viewfinder screen.
The knob and filter settings are listed below.
Examples of filter settings to match shooting conditions
FILTER | Description | Filter | Shooting condition | |
knob setting | 1 | Sunrise, sunset, inside a | ||
1 |
| |||
3200K |
| studio | ||
2 | 5600K+ 1/4ND | 2 | Outdoors under a clear sky | |
3 | 5600K | 3 | Outdoors under a cloudy or | |
4 | 5600K+ 1/16ND |
| rainy sky | |
4 | Snow scenes, high | |||
|
| |||
|
|
| mountains, coastlines and | |
|
|
| other extremely clear and | |
|
|
| bright scenes |
WHITE BAL (white balance memory selector) switch
PRST: Set to this position when there is no time to adjust the white balance. The white bal- ance value for 3200K is stored in the memory.
A or B: When the AUTO W/B BAL switch
is pressed to the AWB side, the white balance is automatically adjusted in accordance with the setting position of the filter knob , and the adjustment value is stored in memory A or memory B.
When the FILTER knob and the WHITE BAL switch are set to the same positions as the ones set when the adjustment was made, the adjustment value stored in the memory is called, and the unit is automatically adjusted to the white balance which corresponds to this value.
If the setting of this switch is changed when the menu display mode has been set to “3” (default setting), the new setting will appear for about 3 seconds at the WHITE BAL switch display position on the viewfinder screen. (Example: “W : A”)
- 1 5 -
